Home / Lab testing
Lab testing

SARMs lab testing at Chemyo Labs

How Chemyo Labs tests its SARMs and research compounds, and where to find the certificate of analysis for each product.

How our lab testing works

We send samples to an outside laboratory in St. Petersburg, Florida. The lab is accredited to ISO/IEC 17025:2017 by PJLA, which is the standard for testing and calibration labs.

The lab issues a certificate of analysis (COA) for each sample. Depending on the product, the COA confirms identity, purity or concentration. We put those certificates in the product image gallery so you can open them before you order.

Chemyo Labs certificate of analysis for Ostarine MK-2866 powder

What a lab testing report shows

Take the report for our Ostarine MK-2866 powder, batch BA2177, as an example.

IDENTITY

FT-IR

An infrared scan compared against a reference. For BA2177 the result was positive: the sample is Ostarine.

PURITY

HPLC

Liquid chromatography measured purity at 99.1%, against a specification of more than 99%.

CONCENTRATION

Assay for liquids

For solutions the lab measures mg/ml. Our LGD-4033 batch labeled 10mg/ml tested at 10.6mg/ml.

Where to find lab reports

Short answer: on the product page. Longer answer below.

Open any product page and scroll through the images at the top. The certificates sit after the product photo and label. 48 of our 51 products have at least one report on the page. The exceptions are the Sunifiram powder, the RAD-140 and MK-677 stack, and the 1ml dropper.

If you need the report for the exact batch you received, email sales@chemyolabsusa.com with your order number.

Which lab testing methods we use

Lab testing for Chemyo SARM powders checks identity and purity

Powders are usually checked for identity and purity. Liquids get a concentration assay, because what matters in a bottle is how much compound is in each milliliter. Some products have both kinds of report.

Not every batch of every product has been through every test. We’d rather tell you that than imply otherwise. If a product page doesn’t show the report you want, ask.

Why lab testing matters for research

Lab testing for Chemyo liquid SARMs measures concentration in mg/ml

A result is only as good as the compound that went into it. If the label says 10mg/ml and the bottle holds 7, every number downstream is off. That’s why we publish the reports instead of just saying a product is tested.

Suspensions are different. Our 5-Amino-1MQ suspension settles in the bottle, which means readings from one bottle to the next can vary by more than 10%, even within a single batch that was made up at the right concentration. We show the figures from three bottles on that page so you know what to expect.

Lab testing and your own records

Accreditation matters here too. An ISO/IEC 17025 lab has to show that its methods are validated and its equipment calibrated, and an outside body checks that on a schedule.

Lab testing only helps if the result can be traced back to the bottle on your bench. That’s why every label carries a batch code, and why we keep the reports filed by batch. When you start a study, note the batch code next to your other materials. If questions come up months later, you’ll be able to match your data to the lab testing report for that exact batch.

We also keep an eye on how products hold up over time, and we’ll send a sample back for fresh lab testing if we have any reason to doubt a batch, whether that’s an odd color, a customer question or simply a long time on the shelf. If a report ever showed a batch outside its specification, it wouldn’t go on sale.

You can also check any compound’s structure on PubChem using the CAS number from our spec tables.

Shop tested research compounds

Every product is in stock, and most show their lab reports on the page.